Your Google Ads campaign is getting clicks, the budget is being spent, and the conversions column still reads zero, or close to it. Before you blame Google, change your bids or pause everything, it is worth working through the problem in a fixed order. In most accounts the cause turns out to be one of a small number of issues: tracking, targeting, the landing page or the offer.
This guide gives you ten checks, in the order we would run them, with what to look for and what to fix. Most can be done in under an hour without any special tools.
Quick answer
First confirm that conversion tracking actually works and that the right actions are set as Primary. Then check the search terms and location settings to make sure you are paying for the right people. Only after that look at the landing page, the offer and your bidding. Fixing tracking or targeting usually matters far more than tweaking ads.
The 10 checks
- Is conversion tracking working?
- Are the right actions set as Primary?
- Are you tracking calls?
- What are people actually searching?
- Are you reaching the right locations?
- Does the landing page match the ad?
- Is the page fast enough on mobile?
- Is the offer strong enough to act on?
- Does your bid strategy fit your data?
- Have you given it enough clicks?
1. Is conversion tracking working at all?
Start here every time. If tracking is broken, Google Ads may be sending you leads that simply are not being recorded, and any optimization you do will be based on wrong data.
In Google Ads, open Goals > Summary and look at the tracking status of each conversion action. Google lists statuses such as Unverified, Tag inactive and Needs attention, and lets you hover over the status and select Troubleshoot to open Tag Assistant (Google Ads Help).
- Unverified means the tag for that conversion action has not fired yet. For a brand new action this is normal, but if you have waited long enough and it still says Unverified, Google says there is an issue with your tag setup (Google Ads Help).
- No conversions in the last 7 days can mean the action was created recently, campaigns are paused, or traffic is too low to trigger a conversion (Google Ads Help).
The simplest real-world test: submit your own form or complete a test purchase, then check whether it appears. If it does not, fix tracking before you touch anything else.
2. Are the right actions set as Primary?
Google Ads separates conversion actions into Primary and Secondary. Primary actions appear in the “Conversions” column and are used for bidding, while Secondary actions are only observed and reported in the “All conversions” column (Google Ads Help, Google Ads Help).
Two common problems show up here:
- Your real lead action is Secondary, so it never shows in the main Conversions column and Smart Bidding ignores it. Google specifically reminds advertisers to make sure the actions they want to optimize for are set as Primary (Google Ads Help).
- A low-value action is Primary, such as page views or button clicks. Then the account “converts”, but none of those conversions are leads, and bidding chases the wrong behavior.
3. Are you tracking phone calls?
For many local and service businesses, the best leads call instead of filling in a form. If calls are not tracked, the account can look like a failure while the phone is actually ringing.
Google notes that to record calls correctly you should enable call reporting in your account settings and set the call conversion action to Primary. You can also set a minimum call length so very short calls do not count (Google Ads Help). Track calls from ads, calls from your website and clicks on your phone number on mobile, so you see the full picture.
4. What are people actually searching?
Your keywords are not the same as the searches that trigger your ads. Open the search terms report and read it line by line. Google describes it as a way to see the actual searches that triggered your ads, and recommends adding irrelevant terms as negative keywords so your ads stop showing to people looking for something you do not sell (Google Ads Help).
Typical waste for service businesses includes searches for jobs, salaries, training courses, DIY instructions, free versions and competitor brand names. Add these as negatives at campaign level or in a shared negative keyword list (Google Ads Help), and review the report every week while the campaign is new.
5. Are you reaching the right locations?
This setting catches out a lot of local businesses. By default, Google’s location option targets people in, regularly in, or who have shown interest in your included locations. To show ads only to people likely to be physically in your area, you need to change the location option to Presence (Google Ads Help).
If you only serve customers in a specific city or region, check this setting and look at the location report to see where clicks are coming from. Google also suggests including location names in ad text, for example changing “coffee shop” to “Boston coffee shop”, to reduce clicks from people outside your area (Google Ads Help).
6. Does the landing page match the ad?
If someone searches for “emergency boiler repair” and lands on your homepage, they have to work to find what they came for. Many will not bother.
Check each ad group’s landing page against the searches it receives:
- Does the headline repeat the service the person searched for?
- Is the location, price range or availability clear above the fold?
- Is there one obvious next step, such as call, book or request a quote?
- Does the page show proof that you are a real, trustworthy business: reviews, photos of real work, accreditations?
If the problem goes beyond one landing page, see website getting traffic but no leads: 10 reasons and how to fix them.
7. Is the page fast enough on mobile?
Most search ad clicks happen on phones. A slow page loses people before they read a word. Google recommends a Largest Contentful Paint of 2.5 seconds or less, an Interaction to Next Paint below 200 milliseconds and a Cumulative Layout Shift below 0.1 for a good user experience (Google Search Central).
Run your landing page through PageSpeed Insights on mobile. Common fixes are compressing large images, removing unnecessary sliders and scripts, and using good hosting with caching.
8. Is the offer strong enough to act on?
Sometimes tracking, targeting and the page are all fine, and people still do not convert because there is no reason to act now. Compare your offer with the top competitors who show up for the same searches. If they offer a free quote, same-day service or clear pricing and you only offer “Contact us”, you are at a disadvantage.
Ask yourself what a cautious buyer needs to feel safe taking the first step, and make that step small: a free estimate, a short call, a price guide or a quick booking form.
9. Does your bid strategy fit your data?
Smart Bidding strategies such as Maximize Conversions or Target CPA learn from the conversions in your account. When there are very few conversions, or the wrong actions count as conversions, the system has little reliable signal to learn from.
- If tracking was only just fixed, give the bid strategy time to learn before judging it.
- Avoid changing bid strategies, targets and budgets every few days. Each change resets what the system has learned.
- If a Target CPA is set far below what your account has ever achieved, the campaign may barely spend or win poor-quality traffic. Start with a realistic target based on actual data.
Still deciding which campaign type to run? See Performance Max vs Search campaigns for local businesses.
10. Have you given it enough clicks?
Small numbers are misleading. If your landing page converts about 3% of visitors, 100 clicks would typically produce around three conversions, and a run of bad luck can easily make that zero. Before deciding a campaign does not work, make sure it has had enough clicks for your normal conversion rate to show up.
If budget is very limited, narrow the campaign to your most valuable service and location instead of spreading the same budget across everything.
Quick diagnosis table
| What you see | Most likely cause | Check first |
|---|---|---|
| Zero conversions, but you know leads came in | Tracking broken or action set as Secondary | Checks 1 and 2 |
| Phone rings, account shows nothing | Calls not tracked | Check 3 |
| High clicks, high spend, irrelevant enquiries | Loose search terms | Check 4 |
| Leads from outside your service area | Location option | Check 5 |
| Good click-through rate, very high bounce | Landing page mismatch or slow page | Checks 6 and 7 |
| Right people visit, few take action | Weak offer or unclear next step | Check 8 |
Frequently asked questions
How long should I wait before deciding Google Ads is not working?
Long enough to collect a meaningful number of clicks for your normal conversion rate, and only after you have confirmed tracking works. A week of data with broken tracking tells you nothing.
Why do I see conversions in “All conversions” but not in “Conversions”?
Usually because those actions are set as Secondary. Secondary actions are reported in “All conversions” but are not used for bidding.
Should I switch to Performance Max if Search is not converting?
Not as a first fix. If tracking, targeting or the landing page are the problem, Performance Max will inherit the same problems. Fix the basics first, then test other campaign types.
Can bad ads cause zero conversions?
Ad copy affects who clicks, so it matters. But in most cases zero conversions point to tracking, targeting, landing page or offer issues rather than the ads alone.
The bottom line
When Google Ads gets clicks but no conversions, work from the bottom up: confirm tracking, confirm what counts as a conversion, clean up search terms and locations, and only then optimize the page, the offer and the bidding. Most accounts do not need a new strategy. They need these basics done properly.
Spending on Google Ads with nothing to show for it?
We will audit your tracking, search terms, settings and landing pages, and tell you exactly what is stopping conversions.